You are here: FAQ

FAQ



HOW TO UPGRADE FIRMWARE
 
To do the upgrade, turn off the STB and connect the STB to the PC using a null 
modem cable (2-3 3-2 5-5), then start the program in the PC, select the new 
firmware to load and start the upgrade procedure, then turn the STB on and the 
upgrade process will begin. Follow the screen instructions.

 
EMU MODE
 

When Emumodule is active, you can access to special menus

- MENU - TOOLS - KEY EDITOR - to edit the keys that change periodically
- INFO - INFO (two times INFO key) - to display information about emulation


------------------------------------------------------------------------------
|********This information does not affect SRX series******** |
------------------------------------------------------------------------------

By default, the module is deactivated, to activate it do the following 
process

1.- Go to main menu (press menu in RCU)
2.- Press 2 0 2 0 in the RCU
3.- A popup message will appear CAS SYSTEM ENABLED 
4.- Emu module is now working

To disable the module repeat the above procedure, the popup will change 
to 'CAS SYSTEM DISABLED'
 
AUTOUPDATE CONTROL 
By default, autoupdate in D+ and TV Cabo is activated.
to deacativate it, go to Main Menu (press menu key in your RCU), and press
2121